C633 Manganese Nickel Aluminum Bronze
Nominal Chemical
Composition
INTRODUCTION
Aufhauser Manganese Nickel Aluminum Bronze filler metal is especially suited for welding ship propellers where resistance to corrosion, erosion and cavitations is required. Good toughness and hardness.
APPLICATIONS
- MIG and TIG welding or surfacing of cast or wrought base metals of similar composition.
- Joining or surfacing copper alloys of unalloyed and low alloy steel as well as gray cast iron subject to corrosion.
GENERAL INFORMATION
Chemical CompositionCopper | Zinc | Manganese | Iron | Silicon | Nickel | Aluminum | Others |
---|---|---|---|---|---|---|---|
Remainder | 0.15* | 11.0-14.0 | 2.0-4.0 | 0.10* | 1.5-3.0 | 7.0-8.5 | 0.50* |
* Max. Note: Copper contains Silver; Nickel includes Cobalt. All values are maximum percentage, unless shown in range.
ADDITIONAL INFORMATION
Copper and its alloys require a relatively high heat input with shortened welding time. Higher preheat temperatures and faster welding rates than for steel are necessary.
PHYSICAL and MECHANICAL PROPERTIES
Tensile Strength | 110,000 psi, max. |
Tensile Strength | 75,000 psi, min. |
Yield Strength | 67,000 psi, max. |
Elongation in 2" | 27% |
Brinell Hardness (3000 kgf) | 160-200 |
SPECIFICATIONS MEET OR EXCEED
AWS A5.7 Class ERCuMnNiAl |
ASME SFA5.7, ERCuMnNiAl |
MIL-E-23765/3 |
UNS C63380 |
STANDARD SIZES AND DIAMETERS
Size | Cast (12" Spool) |
Helix (12" Spool) |
---|---|---|
3/32 or 1/8 x 36" rod | N/A | N/A |
0.035" dia. x 30 lb. spl | 15-40" | < 1" |
0.045" dia. x 30 lb. spl | 15-40" | < 1" |
0.062" dia. x 30 lb. spl | 15-40" | < 1" |
TYPICAL USES FOR ALLOY C633
Product Category | Product | Reason Category | Reason |
---|---|---|---|
Industrial | Welding Rod | Conductivity (Electrical) | Electrical Conductivity |
Welding Rod | Conductivity (Thermal) | Thermal Conductivity | |
Welding Rod | Corrosion Resistance | Oxidation Resistance | |
Welding Rod | Softening Resistance | Resistance to Thermal Softening |